TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
3-134
• The destination port is set by specifying an Ethernet interface.
• You can create only one port mirror session.
• The source and destination ports have to be either both in the port
range 1-12 or both in the port range 13-24.
Example
The following example configures the switch to mirror all packets from
port 6 to port 11:
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6 both
Console(config-if)#
Related Commands
show port monitor
show port monitor
Use this command to display mirror information.
Syntax
show port monitor [interface]
interface - ethernet unit/port (source port)
• unit - Switch (unit 1).
• port - Port number.
Default Setting
Shows all sessions.
Command Mode
Privileged Exec