TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
3-110
Example
Console#show bridge-ext
Max support vlan numbers: 255
Max support vlan ID: 4094
Extended multicast filtering services: No
Static entry individual port: Yes
VLAN learning: IVL
Configurable PVID tagging: Yes
Local VLAN capable: No
Traffic classes: Enabled
Global GVRP status: Disabled
GMRP: Disabled
Console#
IGMP Snooping Commands
This switch uses IGMP (Internet Group Management Protocol) to query
for any attached hosts that want to receive a specific multicast service. It
identifies the ports containing hosts requesting a service and sends data
out to those ports only. It then propagates the service request up to any
neighboring multicast switch/router to ensure that it will continue to
receive the multicast service.
Command
Basic IGMP Commands
Function Mode Page
ip igmp snooping Enables IGMP snooping GC 3-111
ip igmp snooping vlan Adds an interface as a member of a GC 3-112
static
multicast group
ip igmp snooping Configures the IGMP version for GC 3-113
version
snooping
show ip igmp snooping Shows the IGMP snooping configuration PE 3-113
show bridge multicast
IGMP Querier Commands
Shows the IGMP snooping MAC
multicast list
PE 3-114
ip igmp snooping Allows this device to act as the querier for GC 3-115
querier
IGMP snooping
ip igmp snooping
query-count
Configures the query count GC 3-116