TigerSwitch 10/100/1000 - SMC

ADDRESS TABLE SETTINGS
CLI – This example adds an address to the static address table, but sets it
to be deleted when the switch is reset.
Console(config)#bridge 1 address 00-e0-29-94-34-de vlan 1 forward
ethernet 1/1 delete-on-reset 3-80
Console(config)#
Displaying the Address Table
The Dynamic Address Table contains the MAC addresses learned by
monitoring the source address for traffic entering the switch. When the
destination address for inbound traffic is found in the database, the
packets intended for that address is forwarded directly to the associated
port. Otherwise, the traffic is broadcast to all ports.
Command Usage
• You can display entries in the dynamic address table by selecting an
interface (either port or trunk), MAC address, or VLAN.
• You can sort the information displayed based on interface (port or
trunk), MAC address, or VLAN.
Web – Click Address Table/Dynamic Addresses. Specify the search type
(i.e., Interface, MAC Address, or VLAN), the method of sorting the
displayed addresses, then click Query.
2-31