TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
username
3-26
Use this command to require user name authentication at login. Use the
no form to remove a user name.
Syntax
username name {access-level level | nopassword | password {0 | 7}
password}
no username name
• name - The name of the user.
Up to 8 characters, case sensitive.
Maximum number of users: 16
• access-level level - Specifies the user level.
• The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec.
• nopassword - No password is required for this user to log in.
• {0 | 7} - 0 means plain password, 7 means encrypted password.
• password password - The authentication password for the user.
(Maximum length: 8 characters, case sensitive)
Default Setting
• The default access level is Normal Exec.
• The factory defaults for the user names and passwords are:
username access-level password
guest
admin
0
15
Command Mode
Global Configuration
guest
admin