TigerSwitch 10/100/1000 - SMC

SYSTEM MANAGEMENT COMMANDS
• To use jumbo frames, both the source and destination end nodes (such
as a computer or server) must support this feature. Also, when the
connection is operating at full duplex, all switches in the network
between the two end nodes must be able to accept the extended frame
size. And for half-duplex connections, all devices in the collision
domain would need to support jumbo frames.
• Enabling jumbo frames will limit the maximum threshold for broadcast
storm control to 64 packets per second. (See the “broadcast” command
on page 3-75.)
Example
Console(config)#jumbo frame
Console(config)#
ip http port
Use this command to specify the TCP port number used by the Web
browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Console(config)#ip http port 769
Console(config)#
Related Commands
ip http server
3-29