TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
show map ip dscp
3-132
Use this command to show the IP DSCP priority map.
Syntax
show map ip dscp [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show map ip dscp ethernet 1/1
DSCP mapping status: disabled
Port DSCP COS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#
Related Commands
map ip dscp - Maps CoS values to IP DSCP values.