TigerSwitch 10/100/1000 - SMC

hostname
SYSTEM MANAGEMENT COMMANDS
Command Function Mode Page
clear logging Clears messages from the logging buffer PE 3-33
show logging Displays the state of logging PE 3-33
System Status Commands
show
Displays the contents of the configuration file PE 3-34
startup-config (stored in Flash memory) that is used to start
up the system
show
running-config
Use this command to specify or modify the host name for this device. Use
the no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Displays the configuration data currently in
use
show system Displays system information NE,
PE
show users Shows all active console and Telnet sessions,
including user name, idle time, and IP address
of Telnet client
PE 3-36
NE,
PE
show version Displays version information for the system NE,
PE
Console(config)#hostname SMC8624T
Console(config)#
3-37
3-37
3-38
3-25