TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
Flash/File Commands
copy
3-18
These commands are used to manage the system code or configuration
files.
Command Function Mode Page
copy Copies a code image or a switch configuration
to or from Flash memory or a TFTP server
PE 3-18
delete Deletes a file or code image PE 3-20
dir Displays a list of files in Flash memory PE 3-21
whichboot Displays the files booted PE 3-22
boot system Specifies the file or image used to start up the
system
GC 3-23
Use this command to move (upload/download) a code image or
configuration file between the switch’s Flash memory and a TFTP server.
When you save the system code or configuration settings to a file on a
TFTP server, that file can later be downloaded to the switch to restore
system operation. The success of the file transfer depends on the
accessibility of the TFTP server and the quality of the network connection.
Syntax
copy file {file | running-config | startup-config | tftp}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config}
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.