TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
3-46
Example
Console(config)#snmp-server contact Paul
Console(config)#
Related Commands
snmp-server location
snmp-server location
Use this command to set the system location string. Use the no form to
remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server location WC-19
Console(config)#
Related Commands
snmp-server contact
snmp-server host
Use this command to specify the recipient of a Simple Network
Management Protocol notification operation. Use the no form to remove
the specified host.