TigerSwitch 10/100/1000 - SMC

CONFIGURING THE SWITCH
Port Configuration
Displaying Connection Status
2-24
You can use the Port Information or Trunk Information pages to display
the current connection status, including link state, speed/duplex mode,
flow control, and auto-negotiation.
Command Attributes
• Name – Interface label.
• Type – Indicates the of port type (1000Base-TX or 1000Base-SFP).
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed/Duplex Status – Shows the current speed and duplex mode.
• Flow Control Status – Indicates the type of flow control currently in
use.
• Autonegotiation – Shows if auto-negotiation is enabled or disabled.
• Trunk Member – Shows if port is a trunk member. (Port Information
only)
• Creation – Shows if a trunk is manually configured. (Trunk
Information only)