TigerSwitch 10/100/1000 - SMC

CLASS OF SERVICE CONFIGURATION
Web – Click Priority/Traffic Classes. Assign priorities to the output
queues, then click “Apply.”
CLI – The following example shows how to map CoS values 0, 1 and 2 to
CoS priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to
CoS priority queue 2, and values 6 and 7 to CoS priority queue 3.
Console(config)#interface ethernet 1/1 3-69
Console(config)#queue cos-map 0 0 1 2 3-124
Console(config)#queue cos-map 1 3
Console(config)#queue cos-map 2 4 5
Console(config)#queue cos-map 3 6 7
Console(config)#exit
Console#show queue cos-map ethernet 1/1 3-126
Information of Eth 1/1
Queue ID Traffic class
-------- -------------
0 0 1 2
1 3
2 4 5
3 6 7
Console#
2-57