TigerSwitch 10/100/1000 - SMC

COMMAND LINE INTERFACE
3-24
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir
whichboot
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command Function Mode Page
Device Description Command
hostname Specifies or modifies the host name for the
device
GC 3-25
User Access Commands
enable password Sets a password to control access to various
privilege levels
GC 3-27
Jumbo Frame Command
jumbo frame
Web Server Commands
Allows jumbo frames to pass through the
switch
GC 3-28
ip http port Specifies the port to be used by the Web
browser interface
GC 3-29
ip http server Allows the switch to be monitored or
configured from a browser
GC 3-30
Event Logging Commands
logging on Controls logging of error messages GC 3-30
logging history Limits syslog messages sent to the SNMP
network management station based on
severity
GC 3-31