Programming manual M238 | 3 MB - BERGER - POSITEC

Serial Line Configuration
Step Action
2 Click the button New to create a new initialization value:
The Initialization Value window contains the following parameters:
Access Type: Only Write Multiple Register is allowed
Register Offset: Offset of the %MW that will be initialized
Length: Number of %MW that will be initialized. For example if Offset =2
and Length = 3, %MW2, %MW3 and %MW4 wil be initialized
Initialization Value: Value the registers are initialized with
Comment: Add a comment about this initialization
3 Click the Move up or Move down button to change the position of an
initialization in the list.
Click the Delete button to remove an initialization in the list.
Click the Edit button to change the parameters of an initialization.
4 Click OK to create a new Initialization Value.
140 EIO0000000384 04/2012