Programming manual M238 | 3 MB - BERGER - POSITEC

Services
Services Tab
The Services tab is divided in 2 parts:
RTC Configuration
Device Identification
The figure below shows the Services tab:
Controller Device Editor
NOTE: To have controller information, you must be connected to the controller.
Element Description
RTC
Configuration
PLC time Displays the date/time read from the controller. This read-only
field is initially empty. To read and display the date/time saved
on the controller, click on the Read button.
Local time Lets you define a date and a time which are sent to the
controller by a click on the Write button. A message box
informs the user on the success of the command. Local time
fields are initialized with the current PC settings.
Synchronize
with local
date/time
Lets you send directly the current PC settings. A message box
informs the user of the success of the command.
Device Identification Displays the Firmware version, the Boot Version and the
Coprocessor Version of the selected controller, if connected.
EIO0000000384 04/2012 71