Programming manual M238 | 3 MB - BERGER - POSITEC

AS-Interface Configuration
Address Item Description
3 Configuration / Identification
(CDI, PCD)
Structure of Slave Devices
The standard address slaves each have:
4 input/output bits
4 parameter bits
The slaves with extended addresses each have:
4 input/output bits (the last bit is reserved for inputs only)
3 parameter bits
This field contains all the I/O codes and the
identification codes for all the slaves detected.
4 LDS List of Detected Slaves.
List of all slaves detected on the Fieldbus.
5 LAS List of Active Slaves.
List of slaves activated on the Fieldbus.
6 LPS List of Projected Slaves.
List of slaves configured with SoMachine.
7 LPF List of Peripheral Faults.
List of slaves determined to have generated
peripheral errors.
Each slave has its own address, profile and sub-profile (defines variables
exchange).
The figure below shows the structure of an extended address slave:
92 EIO0000000384 04/2012