Programming manual M238 | 3 MB - BERGER - POSITEC

M238 Embedded Functions
HSC Configuration Window
The following figure shows a sample HSC configuration window used to configure
the HSC:
The following table describes the areas of the HSC configuration window:
Number Action
1 Select the HSC tab to access each one of the HSC configuration windows.
2 Select a specific HSC tab to access the HSC channel you need to configure.
3 After choosing the type of HSC (Simple or Main) you want, use the field Variable
to change the instance.
4 You can expand each parameter by clicking the plus sign next to it to access its
settings.
5 Configuration window where the HSC parameters are set depending on the mode
used.
6 When you click on the IO Summarize button, the IO Summary window appears.
It allows you to check your configured I/O mapping.
For detail information on configuration parameters, refer to M238 HSC choice matrix
(see Modicon M238 Logic Controller, High Speed Counting, M238 HSC Library
Guide).
EIO0000000384 04/2012 75