Programming manual M238 | 3 MB - BERGER - POSITEC

Serial Line Configuration
Adding a Modem to a Manager
Introduction
A modem can be added to the following managers:
ASCII Manager
Modbus Manager
SoMachine Network Manager
Adding a Modem to the Manager
To add a Modem, proceed as follows:
Step Action
1 Select the Configuration tab.
2 Click the available port of the Manager in the graphical configuration editor.
See example below for TM238LFDC24DT and TM238LFAC24DR :
3 The Add object window is displayed.
Click the Modem to add and click the Add and close button.
For further information, refer to Modem Library (see SoMachine, Modem Functions,
Modem Library Guide).
148 EIO0000000384 04/2012