FR60 MB91460E Series - Microcontrollers - Fujitsu

Parameter Symbol
Analog inputleakage
current
Sum input
leakage
current
Pull-up
resistance
Pull-down
resistance
Input
capacitance
IAIN ANn * 2
Σ IL
RUP
Pnn_m
*3 ,
ALARM
_0
Pnn_m
* 4
INITX
RDOWN Pnn_m
* 5
CIN
Pin
name
All except
VDD5,
VDD5R,
VSS5,
AVCC5,
AVSS,
AVRH5
Condition
3.0V ≤ VDD ≤ 5.5V
TA=25 °C
3.0V ≤ VDD ≤ 5.5V
TA=105 °C
VDD5 ≥ VIN ≥ VSS5,
AVCC5 ≥ VIN ≥ AVSS5
Σ (1 to n)
[max(|ILHi|,
|ILLi|)]
Value
Min Typ Max
MB91460E Series
− 1 ⎯ + 1 µA
− 3 ⎯ + 3 µA
− 8 30 µA
3.0V ≤ VDD ≤ 3.6V 40 100 160
4.5V ≤ VDD ≤ 5.5V 25 50 100
3.0V ≤ VDD ≤ 3.6V 40 100 180
4.5V ≤ VDD ≤
5.5V 25 50 100
f = 1 MHz - 5 15 pF
Unit Remarks
n = number of IO
= 65 GPIO + 1
ALARM
ILH: leakage at
high level input;
ILL: leakage at
low level input
1. Pnn_m includes all GPIO pins. Analog (AN) channels and PullUp/PullDown are disabled.
2. ANn includes all pins where AN channels are enabled.
3. Pnn_m includes all GPIO pins beside the external bus pins (P00 to P13) and Stepper Motor pins (P25,
P26, P27). Analog (AN) channels and PullUp/PullDown are disabled.
4. Pnn_m includes all GPIO pins. The pull up resistors must be enabled by PPER/PPCR setting and
the pins must be in input direction.
5. Pnn_m includes all GPIO pins. The pull down resistors must be enabled by PPER/PPCR setting and
the pins must be in input direction.
(Continued)
DS705-00002-1v3-E 157
kΩ
kΩ