User Guide for 3050 ICP Users - Mitel Edocs

More documents

Recommendations

Info

5055 SIP Phone User Guide (Rev. A) 6. Enter your SIP Registration user name, and press the Submit softkey. 7. Enter your SIP Registration password, and press the Submit softkey (if your SIP Service Provider does not require a password, enter any character, and delete it using the
Making Calls With the 5055 SIP Phone you can dial: • by number (user number, telephone number). • by name (user name). • by URL (SIP URL address, SIP IP address). - 15 - 5055 SIP Phone Features Note: To dial a regular telephone number, you must have a SIP Service Provider that provides access to the regular (PSTN) phone network. When the connection is successful, the address of your party is displayed (truncated to 14 characters), and a counter starts at the top right of the display. If the line is busy, the display shows “BUSY HERE”. If your party does not answer, the display shows “NO ANSWER”. To end or abort a call: • All modes: − Press the Cancel key or the Hangup softkey to get a new dial tone. − Press the Line key associated with the call to return to the default display. • Handset mode only: − Put the handset back in its cradle. • Handsfree mode only: − Press the Speaker key. This returns your to the default display. Dialing by Number To dial by number: 1. Get a dial tone: • Handset mode: lift the handset. • Headset mode: press the Headset key, then press a Line key. You can also start entering a number after pressing the Headset key (you won’t get a dial tone). • Handsfree mode: press the Speaker key or press a Line key. You can also start entering a number after pressing the Speaker key (you won’t get a dial tone). This selects the first free line (Line 1 if all lines are free). To select another line, press the associated Line key. The light of the selected Line key turns red. In hansdfree mode, the Microphone key light turns red; in headset mode, and the Headset key light turns red. 2. Enter the number of the party you want to reach using the keypad. 5055 SIP. Phones that are connected to 3050 ICPs, can use abbreviated two or three-digit numbers to reach other 3050 ICP attached phones, or regular 7-digit numbers to reach phones on the PSTN. Check with your phone system installer to learn if your system supports these options. • If you mistype a number, press the
Page 2 and 3: NOTICE The information contained in
Page 4 and 5: 5055 SIP Phone User Guide (Rev. A)
Page 70 and 71:
5055 SIP Phone User Guide (Rev. A)
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
show all

User Guide for 3050 ICP Users - Mitel Edocs

Create successful ePaper yourself

Delete template?

Save as template?