User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
- 33 -<br />
Administrator Tools<br />
Administrator Tools<br />
This section contains the following in<strong>for</strong>mation on configuring the administrative settings of<br />
the 5055 SIP Phone:<br />
• Changing Passwords<br />
• Setting Up <strong>User</strong> Profiles<br />
• Creating/Modifying a SIP Account<br />
• Modifying the Network Configuration<br />
• Upgrading the Software of the SIP Phone<br />
• Additional Settings<br />
These settings are changed using the Web Configuration Tool or the SIP Phone Menu<br />
Interface.<br />
Note: You cannot change these settings while on a call.<br />
Changing Passwords<br />
The Administrator can change the password <strong>for</strong> all defined users using the Web<br />
Configuration Tool or the SIP Phone Menu Interface.<br />
Note: The Administrator password should be changed as soon as possible to prevent<br />
unauthorized access to the Administrator functions of the SIP Phone.<br />
Using the Web Configuration Tool<br />
1. Access the Web Configuration Tool using the Administrator user name and password<br />
(see The Web Configuration Tool on page 8).<br />
2. Click Security Config.<br />
3. Change the passwords as required (note: you cannot change user names using this<br />
screen).<br />
4. Click the Apply button. A confirmation screen is displayed.<br />
5. Click the OK button. The SIP Phone is updated.<br />
Using the SIP Phone Menu Interface<br />
You must repeat this procedure <strong>for</strong> each password that needs to be changed.<br />
1. Press the Menu key.<br />
2. Press the >> softkey. “USERS?” is displayed.<br />
3. Press the OK softkey.<br />
4. Press the softkey until “4.CHANGE PASSWORD?” is displayed, and press the OK<br />
softkey.<br />
5. Enter the Administrator user name, or the user name <strong>for</strong> the user profile whose password<br />
you are changing, and press the Submit softkey.