User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ethernet Configuration Page<br />
- 63 -<br />
Appendix B—Web Configuration Tool<br />
For two Ethernet devices to connect, they must share the same speed and duplex setting.<br />
Most current devices are capable of negotiating compatible settings automatically, as soon as<br />
you connect them. Some older equipment does not support auto negotiation, <strong>for</strong> this<br />
equipment, you will have to use this page to select the Ethernet operating parameters<br />
manually<br />
Figure 17 Web Configuration Tool: Ethernet Configuration Page<br />
Table 16 Web Configuration Tool: Ethernet Configuration Settings<br />
Setting Name Values (bold = default) Notes<br />
PC port<br />
LAN port<br />
Auto<br />
10 Half<br />
10 Full<br />
100 Half<br />
100 Full<br />
Auto<br />
10 Half<br />
10 Full<br />
100 Half<br />
100 Full<br />
The Auto setting lets the 5055 SIP phone<br />
and the PC negotiate the Ethernet speed<br />
and duplex automatically. If the PC does not<br />
support auto-negotiation, you must select a<br />
compatible setting manually.<br />
The Auto setting lets the 5055 SIP phone<br />
and the Ethernet device (hub, router, layer 2<br />
switch, broadband modem etc.) negotiate<br />
the Ethernet speed and duplex. If the device<br />
does not support auto-negotiation, you must<br />
select a compatible setting manually.
Change language