User Guide for 3050 ICP Users - Mitel Edocs

More documents

Recommendations

Info

5055 SIP Phone User Guide (Rev. A) User Configuration Page The User Configuration page lets you change your user profile’s basic parameters. You must be logged in and your user profile must be active to change these settings (see Using Profiles on page 11). After making the changes, click the Save and Reboot button; this will reboot your phone. Figure 13 Web Configuration Tool: User Configuration Page Table 12 Web Configuration Tool: User Configuration Settings Setting Name Basic Values (bold = default) Notes Unique name or number assigned to you. User ID or Extension Limit of 32 characters. Default is user for default user profile. The name displayed on your phone when User Display Name your user profile is active. Limit of 20 characters. Default is display username for default user profile. Your SIP Account name provided by your SIP Authentication User Name SIP Service Provider. Required only if you have a SIP Service Provider. Default is user for default user profile. Your SIP account password provided by your SIP Service Provider. If you do not Password have a SIP Service Provider, password used to log in and activate your user profile. Public Phone Number Email address - 56 - Public phone number used as a possible alternative contact. Default is blank. E-mail address used as a possible alternative contact. Default is blank.
- 57 - Appendix B—Web Configuration Tool Setting Name Values (bold = default) Notes MultiUser profiles work best with SIP phones that are being used in stand-alone MultiUser Profile off installations (not directly connected to a 3050 ICP). Turn this feature on, only if your SIP phone is stand-alone, and you need this feature.
Page 2 and 3:
NOTICE The information contained in
Page 4 and 5:
5055 SIP Phone User Guide (Rev. A)
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13: 5055 SIP Phone User Guide (Rev. A)
show all

User Guide for 3050 ICP Users - Mitel Edocs

Create successful ePaper yourself

Delete template?

Save as template?