User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5055 SIP Phone <strong>User</strong> <strong>Guide</strong> (Rev. A)<br />
Automatic<br />
Outband & Inband<br />
DTMF Type<br />
Outband<br />
Inband<br />
DTMF Payload Type<br />
96<br />
(96-127)<br />
Media Start Port 8000<br />
Media End Port 19998<br />
Security Configuration Page<br />
- 62 -<br />
Used <strong>for</strong> DTMF tone generation (Outband<br />
used <strong>for</strong> RTP DTMF).<br />
These fields specify the UDP port range<br />
used by the 5066 SIP phone. Change this if<br />
the default range conflicts with other<br />
devices in your network.<br />
The Security Configuration Page lets the administrator change the passwords <strong>for</strong> the user<br />
profiles and the administrator. This page can only be accessed using the Administrator user<br />
name and password. After making the changes, click the Apply button.<br />
Figure 16 Web Configuration Tool: Security Configuration Page<br />
Table 15 Web Configuration Tool: Security Configuration Settings<br />
Setting Name Values (bold = default) Notes<br />
<strong>User</strong> ID As programmed.<br />
Cannot change this value here. Defaults are<br />
admin <strong>for</strong> Administrator, and user <strong>for</strong><br />
default user profile.<br />
Password Change as needed. Default is 5055 <strong>for</strong> Administrator.
Change language