User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
User Guide for 3050 ICP Users - Mitel Edocs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5055 SIP Phone <strong>User</strong> <strong>Guide</strong> (Rev. A)<br />
Address Type IPv4 | Fqdn<br />
SIP Phone IP Address <br />
Subnet Mask <br />
Default Gateway <br />
Primary DNS <br />
Secondary DNS <br />
Additional Servers<br />
TFTP Server <br />
SNTP Server <br />
Time Zone <br />
Advanced<br />
TFTP Configuration Yes | No<br />
ToS value 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7<br />
802.1 Priority Off | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7<br />
VLAN Id <br />
- 54 -<br />
IPv4: outgoing SIP requests use dotted<br />
<strong>for</strong>mat of IP address.<br />
Fqdn: outgoing SIP requests use<br />
“sip:host_name.domain” <strong>for</strong>mat <strong>for</strong> “contact”<br />
SIP header.<br />
Required. Provided automatically by ISP or<br />
LAN when DHCP is On 1 .<br />
Required. Provided automatically by ISP or<br />
LAN when DHCP is On 1 . Default is<br />
255.255.255.0.<br />
Required. Provided automatically by ISP or<br />
LAN when DHCP is On 1 .<br />
Required. Provided automatically by ISP or<br />
LAN when DHCP is On 1 .<br />
Optional. Provided automatically by ISP or<br />
LAN when DHCP is On 1 .<br />
Optional. The server where updates to the<br />
firmware can be downloaded.<br />
Optional. Server used <strong>for</strong> date/time<br />
synchronization. Default is 192.53.103.103.<br />
Optional. Difference between GMT and<br />
local time. Default is –5 (Eastern Standard<br />
Time) .<br />
If set to yes, the SIP Phone looks <strong>for</strong><br />
configuration files on the TFTP server when<br />
it boots up. The settings in the configuration<br />
files will overwrite any manually entered<br />
settings. Default is 192.168.0.1.<br />
Type of Service. QOS parameter used to<br />
define packet priority <strong>for</strong> the IP layer.<br />
QOS parameter used to define packet<br />
priority <strong>for</strong> Ethernet layer.<br />
Virtual LAN Id. Used by network<br />
administrators. Default is 1.<br />
PPPoE On | Off<br />
Point-to-Point Protocol over Ethernet.<br />
Enabled when using a DSL network.<br />
PPPoE Login Required <strong>for</strong> DSL. Provided by DSL ISP.<br />
PPPoE Password Required <strong>for</strong> DSL. Provided by DSL ISP.<br />
Time Zones<br />
The table below is provided <strong>for</strong> your convenience. <strong>Mitel</strong> Network does not guarantee it’s<br />
accuracy. For Daylight Savings Time, add +1 (<strong>for</strong> example, if your standard time is –5, your<br />
daylight savings time is –4).<br />
Table 11 Major Time Zones<br />
Time Zone Diff. from GMT<br />
Fiji, New Zealand, Marshall Islands (US) ±12<br />
1<br />
If you change this value manually with DHCP On, it will be overwritten by the ISP/LAN the next<br />
time the phone is rebooted.