Digital Mailing System DM100i - ASAP Postage Meter Ink, BC

3 • Running Mail
Correcting a Date on a Mail Piece
This procedure is used if you have applied the wrong date to a mail
piece and need to make a correction. For example, if you already
ran your mail for the day but it was too late for that day's mail pickup,
you can apply the next business day's date on the mail pieces so
they can be processed correctly by the post office. However, you first
need to advance the date on the machine before correcting the date
on the mail piece.
NOTE: You cannot change the printed date to a date earlier than the
meter's internally held date (in an effort to "backdate" the mail).
1. Press Options.
2. Select “Advance the date”.
3. The system displays current date. You may either:
A. Select “Add one day” to advance date one day for each
pressing of the key.
B. Key in a number (from 1-30) representing the number of days
you want to advance the date, then select “Add x days (1-30)”.
4. Select “Continue”. The new date now shows in the Home screen.
5. At the Home screen:
• If you have a scale, place the mail piece on it.
• If you have any weight showing, select "CLASS" or "Select a
class" (depending on your machine settings).
• If "Enter Manual Weight" is showing, you need to enter a
manual weight first (see steps A-C below).
A. Press Weigh/Rate.
B. Key in 1 g and select “Continue”.
ENTER WEIGHT
1 g
◄Change to kg
◄Continue
Page
Up
Page
Down
C. Select "CLASS" or "Select a class" (depending on your
machine settings).
6. Select "Other Payment" option, then select "Date Correct".
Page
x g
Up
◄Canpost
◄Other Payment
3-16 SV61195 Rev. B