Digital Mailing System DM100i - ASAP Postage Meter Ink, BC

7 • System Options
Setting the Date, Time, and Timeouts
You can change the system date/time, set the date/time to day light
sav ings time, change the time at which your sys tem advances the
date/time to the next day, and set the amount of time your sys tem
can re main in ac tive be fore re vert ing to the nor mal preset val ues.
TIME & TIMEOUTS
◄Normal Preset
◄Sleep Mode
◄Autodate Advance
TIME & TIMEOUTS
◄Correct Drift
◄Daylight Saving
◄Postage Display
Page
Up
Page
Down
Page
Up
Page
Down
(lit key indicates
more menu choices)
IMPORTANT: If you change any of the Date, Time, or Timeout
settings, you must make a connection to the Pitney Bowes Data
Centre (see Chapter 6, Adding Postage/Connecting to Data Center),
to update the system prior to processing mail.
Setting the Normal Preset Timer
The normal preset is a set of values (postage, ad, ac count and so
on) that your machine display au to mat i cal ly returns to after a set
period of time. You can set the amount of time the display takes
before it re verts to the normal preset.
1. Press Options.
2. Press Page Down.
3. Select "Time and Timeouts".
4. Select "Normal Preset". The current setting is displayed.
5. Key in a new amount of minutes (from 1-240) be fore the system
re turns to the normal pre set and select "OK". If you don't want to
change the current setting, just select "OK. The display returns to
the Time and Timeouts menu.
6. Press Clear (back arrow key) to return to Options Menu.
7-6 SV61195 Rev. B