DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

More documents

Recommendations

Info

8. CHOOSING DIGITAL ICE/ROC/GEM PROCESSING The scanned image can be enhanced with Digital ICE 3 image processing. These tools cannot be used with traditional black and white film. Click on the buttons to choose the image processing to be applied to the scanned images. Click “Next >” to continue. • Digital ICE reduces the effect of dust, flaws, scratches, and fingerprints on the film surface. This cannot be used with Kodachrome film. • Digital ROC restores the colour of faded film. • Digital GEM reduces the effect of film grain. • See pages 69 to 73 for more about Digital ICE, ROC, and GEM. • <strong>Scan</strong>ning time increases with the number of image processing routines used. 9. CONFIRMING THE SCANNER SETTINGS Check the scanner settings on the confirmation screen. If all settings are correct, click “Start” to begin the scan. • To change any setting, continue to click “Back” until the appropriate screen appears. 10. SCANNING AND SAVING THE IMAGE On the save-as screen, specify the file name and destination of the image data. Click “Save”. • When more than one image is scanned, each image is saved with the input file name plus a two-digit serial number. • When scanning is complete, the Easy <strong>Scan</strong> Utility is shutdown automatically. 28
TURNING OFF THE SCANNER 1 Press the eject button to unload the film holder or APS adaptor. • The scanner automatically ejects the 35mm film or slide mount holder to the initial inserting position. Do not touch or hinder the holder while it is moving. • When using the optional APS adaptor, the scanner automatically rewinds the film when the eject button is pressed. Do not remove the adaptor until the rewind motor has stopped. 2 3 35mm 2 Close the front door. 35mm 3 Press the main switch to turn off the scanner. • Unplug the scanner when cleaning or when the product is not in use for extended periods. • When using the IEEE 1394 cable with Windows Me, complete the “Unplug or eject hardware” operation by doubleclicking on the “Unplug or eject hardware” icon on the task bar before turning off the scanner (see page 87). This step is unnecessary if the computer is shutdown before turning off the scanner. • When restarting the computer, only steps 1 and 2 need to be completed. 35mm EASY SCAN UTILITY 29
Page 1 and 2: STANDARD SCAN UTILITY EASY SCAN UTI
Page 3 and 4: OTHER DISPLAYS IN THE PRESCAN WINDO
Page 5 and 6: This mark certifies that this produ
Page 7 and 8: 35 m 35mm 35mm • Store this produ
Page 9 and 10: INSTALLING THE UTILITY SOFTWARE To
Page 11 and 12: 4 Click “Next” to view the lice
Page 13 and 14: 10 Any software that is running mus
Page 15 and 16: 6 Read the cautions on the setup sc
Page 17 and 18: 1 Turn on the computer to start the
Page 19 and 20: NAMES OF PARTS 35mm film-holder mar
Page 21 and 22: DISCONNECTING THE CABLE WITH WINDOW
Page 23 and 24: 2. LOADING THE FILM HOLDER Using th
Page 25 and 26: 2 CAUTION • Do not remove the APS
Page 27: 5. MAKING AN INDEX SCAN An index sc
Page 31 and 32: 1. LAUNCHING THE STANDARD SCAN UTIL
Page 33 and 34: 2. SETTING UP THE SCANNER MAIN WIND
Page 35 and 36: Multi-sample list box Multi-samplin
Page 37 and 38: 5. INDEX SCAN The index scan is a l
Page 39 and 40: ROTATING OR FLIPPING THE INDEX FRAM
Page 41 and 42: SAVING AN INDEX FILE The index thum
Page 43 and 44: MAKING A PRESCAN 1 Select the index
Page 45 and 46: PRESCANNING THE CROPPED IMAGE Click
Page 47 and 48: ZOOMING The prescan image can be en
Page 49 and 50: AE LOCK The exposure obtained with
Page 51 and 52: CROPPING APS IMAGES When APS film f
Page 53 and 54: TONE CURVES AND HISTOGRAM Click the
Page 55 and 56: CHANGING THE TONE CURVES 1 Place th
Page 57 and 58: INCREASING THE CONTRAST OF AN IMAGE
Page 59 and 60: 6 Click a neutral area of the image
Page 61 and 62: COLOUR CORRECTIONS WITH THE HISTOGR
Page 63 and 64: HUE/SATURATION/LIGHTNESS CORRECTION
Page 65 and 66: BRIGHTNESS & CONTRAST VARIATION Eig
Page 67 and 68: • Shadow protection level: can be
Page 69 and 70: DIGITAL ICE, ROC, AND GEM CORRECTIO
Page 71 and 72: DIGITAL ROC The Digital ROC (Recons
Page 73 and 74: 6 Adjust or move the Digital-GEM sa
Page 75 and 76: USING JOB FILES The Standard Scan U
Page 77 and 78: INPUTTING SCAN SETTINGS MANUALLY In
Page 79 and 80:
EXAMPLE: SETTING OUTPUT BY PRINT SI
Page 81 and 82:
9. MAKING THE FINAL SCAN WHEN USING
Page 83 and 84:
CUSTOM WIZARD This function automat
Page 85 and 86:
2 QUITTING THE STANDARD SCAN UTILIT
Page 87 and 88:
WHEN USING THE IEEE 1394 CABLE WITH
Page 89 and 90:
OUTPUT COLOUR SPACE The choice of o
Page 91 and 92:
SCANNER NOTES Scanner colour profil
Page 93 and 94:
JOB FILE LIST • To save new Job f
Page 95 and 96:
TECHNICAL SPECIFICATIONS Scan type:
Page 97 and 98:
USER TECHNICAL SUPPORT Please conta
Page 99:
Input-resolution list box .........
show all

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?