25.03.2014 Views

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

35 m<br />

35mm<br />

35mm<br />

• Store this product out<br />

of reach of children. Be<br />

careful when around<br />

children, not to harm<br />

them with the product<br />

or parts.<br />

• If the product emits a<br />

strange odour, heat, or<br />

smoke, discontinue<br />

use. Immediately<br />

unplug the power cord<br />

taking care not to burn<br />

yourself. The continued<br />

use of a damaged<br />

product or parts may<br />

cause injury or fire.<br />

CAUTION<br />

• The required operating environment must be<br />

between 10°C and 35°C with less than 80%<br />

humidity. A sudden change in temperature can<br />

cause condensation inside the product, which<br />

may result in electric shock or fire. When the<br />

product is subjected to a drastic change in temperature,<br />

allow the product time to come to<br />

equilibrium with the surrounding environment.<br />

Power supply:<br />

• Insert the plug<br />

securely into the electrical<br />

outlet.<br />

• Do not obstruct<br />

access to the AC<br />

adaptor; this can hinder<br />

the unplugging of<br />

the unit in emergencies.<br />

Basic operation:<br />

• This product should<br />

only be operated in the<br />

upright position.<br />

Inappropriate placement<br />

may result in fire.<br />

• Do not cover the AC<br />

adaptor. A fire may<br />

result.<br />

• Periodically check<br />

that the power cord is<br />

not damaged and the<br />

plug is clean. Dust and<br />

dirt that may collect<br />

between the prongs of<br />

the plugs may result in<br />

fire.<br />

• Do not use if the cord<br />

is damaged.<br />

• Damage or injury through fire or electric<br />

shock may result if the product is used or<br />

stored in the following conditions:<br />

In humid or dusty environments.<br />

In direct sunlight or hot environments.<br />

In smoky or oily areas.<br />

In unventilated areas.<br />

On unstable or unlevel surfaces.<br />

Disconnect power supply<br />

when not in use.<br />

• Unplug the product<br />

when cleaning or<br />

when the product is<br />

not in use for long<br />

periods.<br />

Additional cautions:<br />

• Do not move, obstruct, or touch the film holder<br />

when scanning. The product or scanned<br />

images can be damaged.<br />

• Do not use a brush or air brush to clean the<br />

interior of the product.<br />

7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!