DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

SAVING A JOB FILE
Frequently used scan settings can be saved.
1 With the scan settings to be saved in the
scan settings window, click on the save
Job button .
• The Job-registry dialog box appears.
2 Select the category in which to save the
settings from the drop-down menu.
3 Enter the Job file name. Click “OK” to save
the settings.
• The Job file name can contain up to 24 characters.
DELETING A JOB FILE
A Job file can be deleted.
1 Click the Job load button.
2 Select the Job file to be deleted from the
Job categories in the selection window.
3 Use the following key(s) to delete the
selected file:
: Delete key
: Command ( ) key + D.
• Once deleted, the Job file cannot be recovered.
80