DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...
DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...
DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2<br />
QUITTING THE STANDARD SCAN UTILITY<br />
To turn off the scanner at the end of a scanning session, following steps 1 through 4. To restart the<br />
computer, following steps 1 through 3.<br />
1 Quit the Standard <strong>Scan</strong> Utility software or close <strong>Photo</strong>shop Elements.<br />
2 Press the eject button to unload the film holder or APS adaptor.<br />
• The scanner automatically ejects the 35mm film or slide mount holder to the initial inserting<br />
position. Do not touch or hinder the holder while it is moving.<br />
• When using the optional APS Adaptor, the scanner automatically rewinds the film when the<br />
eject button is pressed. Do not remove the adaptor until<br />
the rewind motor has stopped.<br />
35mm<br />
3 Close the front door.<br />
4 Press the main switch to turn off the scanner.<br />
• Unplug the scanner when cleaning or when the product<br />
is not in use for extended periods.<br />
• When using the IEEE 1394 cable with Windows Me, complete<br />
the “Unplug or eject hardware” operation by doubleclick<br />
on the “Unplug or eject hardware” icon on the task<br />
bar before turning off the scanner (see page 87). This<br />
step is unnecessary if the computer is shutdown before<br />
turning off the scanner.<br />
35mm<br />
35mm<br />
STANDARD SCAN UTILITY<br />
85