DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

More documents

Recommendations

Info

INPUTTING THE SCAN SETTING BY YOURSELF TIPS Resolution and output size The resolution can be expressed in dpi (dots per inch). This refers to how many pixels are placed along one linear inch. The resolution of 350 dpi, which is commonly used in the commercial printing field, means that an area of one square inch would use 122,500 pixels. The larger the resolution, the greater the detail in the image. However, as the resolution increases, so does the file size. The image resolution should be decided by the resolution of the output device. A printer with a resolution of 150 dpi will not be able to print a 300 dpi file any better than a 150 dpi file; the 300 dpi file will just be four-times larger. Once the output resolution is determined, the input resolution should be calculated from the magnification needed to match the output. Input resolution Output resolution = Output size Input size = Magnification For example, imagine the output print is 150mm x 100mm at the resolution of 150 dpi. The input image is from 35mm film (image size: 36mm x 24mm). The magnification can be calculated as follows: Output size Input size = 100mm (print) 24mm (film) = approx. 4 times From this, the input resolution can be determined: 150 dpi multiplied by 4. The input resolution needed is 600 dpi. EXAMPLE: SETTING THE SCANNER OUTPUT BY PIXELS 1 Select “pixel” from the unit list box. • The output-resolution and input-size boxes are deselected. 2 Enter the dpi resolution for the output size. In this example, enter 640 for the width and 480 for the height. Click the output-size lock button to fix the values. • The output-size boxes will be deselected. 3 Use the mouse to adjust the cropping frame over the prescan image to define the final scanning area. • Click on the frame of the cropping area to resize the box. The input resolution will adjust according to the cropping area. Click and drag the centre of the area to move the frame. • The scan setting is now complete. • Once made, scan settings remain in effect until changed. 78
EXAMPLE: SETTING OUTPUT BY PRINT SIZE AND OUTPUT RESOLUTION 1 Select millimetres from the unit list box. 2 Enter the output resolution in the output-resolution list box. In this example, enter 300. • This example is based on a printer with a 300 dpi output. 3 Enter the output size: in this example, enter 148 for the width and 100 for the height. Click on the output-size lock button to fix the values. 4 Use the mouse to adjust the cropping frame over the prescan image to define the final scanning area. • Click on the frame of the cropping area to resize the box. The input resolution will adjust according to the cropping area. Click and drag the centre of the area to move the frame. • The scan setting is now complete. • Once made, scan settings remain in effect until changed. STANDARD SCAN UTILITY 79
Page 1 and 2:
STANDARD SCAN UTILITY EASY SCAN UTI
Page 3 and 4:
OTHER DISPLAYS IN THE PRESCAN WINDO
Page 5 and 6:
This mark certifies that this produ
Page 7 and 8:
35 m 35mm 35mm • Store this produ
Page 9 and 10:
INSTALLING THE UTILITY SOFTWARE To
Page 11 and 12:
4 Click “Next” to view the lice
Page 13 and 14:
10 Any software that is running mus
Page 15 and 16:
6 Read the cautions on the setup sc
Page 17 and 18:
1 Turn on the computer to start the
Page 19 and 20:
NAMES OF PARTS 35mm film-holder mar
Page 21 and 22:
DISCONNECTING THE CABLE WITH WINDOW
Page 23 and 24:
2. LOADING THE FILM HOLDER Using th
Page 25 and 26:
2 CAUTION • Do not remove the APS
Page 27 and 28: 5. MAKING AN INDEX SCAN An index sc
Page 29 and 30: TURNING OFF THE SCANNER 1 Press the
Page 31 and 32: 1. LAUNCHING THE STANDARD SCAN UTIL
Page 33 and 34: 2. SETTING UP THE SCANNER MAIN WIND
Page 35 and 36: Multi-sample list box Multi-samplin
Page 37 and 38: 5. INDEX SCAN The index scan is a l
Page 39 and 40: ROTATING OR FLIPPING THE INDEX FRAM
Page 41 and 42: SAVING AN INDEX FILE The index thum
Page 43 and 44: MAKING A PRESCAN 1 Select the index
Page 45 and 46: PRESCANNING THE CROPPED IMAGE Click
Page 47 and 48: ZOOMING The prescan image can be en
Page 49 and 50: AE LOCK The exposure obtained with
Page 51 and 52: CROPPING APS IMAGES When APS film f
Page 53 and 54: TONE CURVES AND HISTOGRAM Click the
Page 55 and 56: CHANGING THE TONE CURVES 1 Place th
Page 57 and 58: INCREASING THE CONTRAST OF AN IMAGE
Page 59 and 60: 6 Click a neutral area of the image
Page 61 and 62: COLOUR CORRECTIONS WITH THE HISTOGR
Page 63 and 64: HUE/SATURATION/LIGHTNESS CORRECTION
Page 65 and 66: BRIGHTNESS & CONTRAST VARIATION Eig
Page 67 and 68: • Shadow protection level: can be
Page 69 and 70: DIGITAL ICE, ROC, AND GEM CORRECTIO
Page 71 and 72: DIGITAL ROC The Digital ROC (Recons
Page 73 and 74: 6 Adjust or move the Digital-GEM sa
Page 75 and 76: USING JOB FILES The Standard Scan U
Page 77: INPUTTING SCAN SETTINGS MANUALLY In
Page 81 and 82: 9. MAKING THE FINAL SCAN WHEN USING
Page 83 and 84: CUSTOM WIZARD This function automat
Page 85 and 86: 2 QUITTING THE STANDARD SCAN UTILIT
Page 87 and 88: WHEN USING THE IEEE 1394 CABLE WITH
Page 89 and 90: OUTPUT COLOUR SPACE The choice of o
Page 91 and 92: SCANNER NOTES Scanner colour profil
Page 93 and 94: JOB FILE LIST • To save new Job f
Page 95 and 96: TECHNICAL SPECIFICATIONS Scan type:
Page 97 and 98: USER TECHNICAL SUPPORT Please conta
Page 99: Input-resolution list box .........
show all

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

Create successful ePaper yourself

Delete template?

Save as template?