DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

More documents

Recommendations

Info

STANDARD SCAN UTILITY The Standard Scan Utility allows individual selection over scan settings to optimise the reproduction of the film image. The following flow diagram shows the usual scanning procedure: 1. LAUNCH THE STANDARD SCAN UTILITY (see page 31) The utility can be launched through an image-processing software or as a stand-alone application. 2. SET UP THE SCANNER Settings to control basic scanner operation can be made. 3. LOAD THE FILM HOLDER (see page 33) (see page 36) 4. SET THE FILM FORMAT AND TYPE (see page 36) 5. MAKE AN INDEX SCAN (see page 37) Settings to control the index scan can be made. This step is unnecessary if the index scan is not needed. 6. MAKE A PRESCAN This step is unnecessary if the prescan is not needed. 7. MAKE CORRECTIONS TO THE PRESCAN The following image processing can be applied to the prescan image: • Tone-curve and histogram corrections (see page 53) • Brightness, contrast, and colour-balance corrections (see page 62) • Hue, saturation, and lightness corrections (see page 63) • Variation corrections (see page 64) • Selective-colour corrections (see page 66) • Unsharp mask (see page 66) • Digital ICE, ROC, or GEM processing (see page 69) 8. SET SCAN SETTINGS (see page 42) (see page 52) (see page 74) The input and output settings can be adjusted. 9. MAKE THE FINAL SCAN (see page 81) 30
1. LAUNCHING THE STANDARD SCAN UTILITY CAUTION Confirm the cable is securely connected and the front door of the scanner is closed before turning on the scanner and launching the software. If the front door is open before launching the software, the scanner cannot initialise and will not accept the film holder. The Standard Scan Utility can be launched through an image processing application like Adobe Photoshop Elements, which allows the image to be processed in the application after it is scanned. The utility can also be used as a stand-alone application that can process and save an image without the need of any other software. LAUNCHING THE STANDARD SCAN UTILITY LAUNCHING THE UTILITY WITH PHOTOSHOP ELEMENTS 1 Turn on the scanner and computer. 2 Start up Adobe Photoshop Elements. 3 Select the DS Elite 2 utility from the import command on the file menu. • The Standard Scan Utility will start up and the main window will appear (see page 33). LAUNCHING THE UTILITY SOFTWARE 1 Turn on the scanner and computer. 2 Select the DS Elite 2 utility from the DiMAGE Scan Elite 2 folder in the program option of the start menu. • The Standard Scan Utility will start up and the main window will appear (see page 33). STANDARD SCAN UTILITY 31
Page 1 and 2: STANDARD SCAN UTILITY EASY SCAN UTI
Page 3 and 4: OTHER DISPLAYS IN THE PRESCAN WINDO
Page 5 and 6: This mark certifies that this produ
Page 7 and 8: 35 m 35mm 35mm • Store this produ
Page 9 and 10: INSTALLING THE UTILITY SOFTWARE To
Page 11 and 12: 4 Click “Next” to view the lice
Page 13 and 14: 10 Any software that is running mus
Page 15 and 16: 6 Read the cautions on the setup sc
Page 17 and 18: 1 Turn on the computer to start the
Page 19 and 20: NAMES OF PARTS 35mm film-holder mar
Page 21 and 22: DISCONNECTING THE CABLE WITH WINDOW
Page 23 and 24: 2. LOADING THE FILM HOLDER Using th
Page 25 and 26: 2 CAUTION • Do not remove the APS
Page 27 and 28: 5. MAKING AN INDEX SCAN An index sc
Page 29: TURNING OFF THE SCANNER 1 Press the
Page 33 and 34: 2. SETTING UP THE SCANNER MAIN WIND
Page 35 and 36: Multi-sample list box Multi-samplin
Page 37 and 38: 5. INDEX SCAN The index scan is a l
Page 39 and 40: ROTATING OR FLIPPING THE INDEX FRAM
Page 41 and 42: SAVING AN INDEX FILE The index thum
Page 43 and 44: MAKING A PRESCAN 1 Select the index
Page 45 and 46: PRESCANNING THE CROPPED IMAGE Click
Page 47 and 48: ZOOMING The prescan image can be en
Page 49 and 50: AE LOCK The exposure obtained with
Page 51 and 52: CROPPING APS IMAGES When APS film f
Page 53 and 54: TONE CURVES AND HISTOGRAM Click the
Page 55 and 56: CHANGING THE TONE CURVES 1 Place th
Page 57 and 58: INCREASING THE CONTRAST OF AN IMAGE
Page 59 and 60: 6 Click a neutral area of the image
Page 61 and 62: COLOUR CORRECTIONS WITH THE HISTOGR
Page 63 and 64: HUE/SATURATION/LIGHTNESS CORRECTION
Page 65 and 66: BRIGHTNESS & CONTRAST VARIATION Eig
Page 67 and 68: • Shadow protection level: can be
Page 69 and 70: DIGITAL ICE, ROC, AND GEM CORRECTIO
Page 71 and 72: DIGITAL ROC The Digital ROC (Recons
Page 73 and 74: 6 Adjust or move the Digital-GEM sa
Page 75 and 76: USING JOB FILES The Standard Scan U
Page 77 and 78: INPUTTING SCAN SETTINGS MANUALLY In
Page 79 and 80: EXAMPLE: SETTING OUTPUT BY PRINT SI
Page 81 and 82:
9. MAKING THE FINAL SCAN WHEN USING
Page 83 and 84:
CUSTOM WIZARD This function automat
Page 85 and 86:
2 QUITTING THE STANDARD SCAN UTILIT
Page 87 and 88:
WHEN USING THE IEEE 1394 CABLE WITH
Page 89 and 90:
OUTPUT COLOUR SPACE The choice of o
Page 91 and 92:
SCANNER NOTES Scanner colour profil
Page 93 and 94:
JOB FILE LIST • To save new Job f
Page 95 and 96:
TECHNICAL SPECIFICATIONS Scan type:
Page 97 and 98:
USER TECHNICAL SUPPORT Please conta
Page 99:
Input-resolution list box .........
show all

DiMAGE Scan Elite II Hardware OM - Konica Minolta Photo Imaging ...

Create successful ePaper yourself

Delete template?

Save as template?