Warrior Skills Level 1 - Leader Development for Army Professionals

7. If a target can be identified, be aggressive and return fire.
a. Avoid civilian casualties.
b. Avoid collateral damage.
c. Avoid fratricide.
8. Be prepared to mount the vehicle under fire on order to break contact.
Performance Measures GO NO GO
1. Unless dismounting under emergency conditions (under
fire, vehicle burning, and such), conducted a 5/25/200 meter —— ——
scan before dismounting.
2. Exited the vehicle in accordance with established crew —— ——
drill.
3. Exited the vehicle on the non-contact side. —— ——
4. Maintained three points of contact at all times while —— ——
exiting the vehicle.
5. Maintained muzzle awareness at all times. —— ——
6. Granted or denied the vehicle and occupants access to
the installation by using a verbal command and/or hand-andarm
signals.
a. If possible, did not use the vehicle as cover.
b. Avoided vehicle fuel tanks, batteries, stored
ammunition, hazardous cargo, and such.
c. Maintained a low profile (prone or kneeling
position).
d. Scanned for IEDs under and around the vehicle
using the 5/25/200 meter scan technique.
7. Returned fire with aggression when a target could be
identified.
a. Avoided civilian casualties.
—— ——
—— ——
b. Avoided collateral damage.
c. Avoided fratricide.
8. Prepared to mount the vehicle under fire on order to —— ——
break contact.
Evaluation Guidance: Refer to chapter 1, paragraph 1-9e, (1) and (2).
References
Required:
Related: FM 4-01.45
STP 21-1-SMCT 2 May 2011 3-253