CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 Troubleshooting the<br />
<strong>Mercury</strong> <strong>Analyzer</strong><br />
This chapter explains how to troubleshoot mercury analyzer problems. If you<br />
cannot solve a problem using the steps given in this chapter, you should<br />
contact <strong>CETAC</strong> Technologies Customer Service and Support.<br />
Troubleshooting Communication Issues<br />
If the QuickTrace cannot connect to the analyzer:<br />
Step 1: Check the Cable<br />
Check that the PC is connected directly to the M-<strong>7600</strong> with a standard Ethernet<br />
cable. To eliminate the possibility of an IP address conflict with another device<br />
on the company network, disconnect the PC from the company network while<br />
troubleshooting.<br />
Step 2: Use the IPSetup Tool to Check the Configuration<br />
Figure 6-1<br />
IPSetup Tool.<br />
133