CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CETAC</strong> QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
Chapter 7: Safety and Regulatory Information<br />
7 Safety and Regulatory<br />
Information<br />
Review this product and related documentation to familiarize with safety<br />
markings and instructions before you operate the instrument.<br />
Characteristics<br />
Environmental Characteristics<br />
Operating Temperature +5° C to +40° C (+41° F to +104° F)<br />
Non-Operating Temperature +0° C to +55° C (+32° to +131° F)<br />
Operating Altitude<br />
Relative Humidity<br />
Non-Operating Relative Humidity<br />
Up to 2,000 m (6,562 ft)<br />
0% to 80% non-condensing for<br />
temperatures up to 31° C, decreasing<br />
linearly to 50% at 40° C<br />
0% to 95% non-condensing<br />
Pollution Degree Pollution Degree 2<br />
Normally no pollution or only dry, nonconductive<br />
pollution occurs. The<br />
pollution has no influence. Occasionally,<br />
however, a temporary conductivity<br />
caused by condensation may be<br />
expected.<br />
Table 7-1: Environmental Characteristics for Safe Operation<br />
For indoor use only.<br />
Avoid sudden, extreme temperature changes which could cause condensation<br />
on circuit boards in the product.<br />
These environmental characteristics indicate the conditions for safe<br />
operation. See “Establishing Optimal Operating Conditions” on page 17<br />
for the recommended environment for the best experimental results.<br />
149
Change language