CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CETAC</strong> QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
Chapter 4: Using the <strong>Analyzer</strong><br />
4 To set Baseline Point #1, place the end of the read about 4 seconds before the<br />
inflection point on the left side of the peak.<br />
Figure 4-22<br />
Setting Baseline Correction Point #1 (ng/L).<br />
5 Set Baseline Point #2 just after the signal returns to its baseline level on the<br />
right side of the peak.<br />
Figure 4-23<br />
Setting Baseline Correction Point #2 (ng/L).<br />
95
Change language