CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CETAC</strong> QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
Chapter 2: Preparing for Installation<br />
71 cm (28 inches)<br />
142 cm (56 inches)<br />
Figure 2-2 Footprint of QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
with ASX-260 Autosampler.<br />
71 cm (28 inches)<br />
142 cm (56 inches)<br />
Figure 2-3 Footprint of QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
with ASX-130 Autosampler.<br />
46 cm<br />
(18.1 in)<br />
20 cm<br />
(7.9 inches)<br />
56 cm<br />
(22.0 inches)<br />
Figure 2-4 Dimensions of the QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong>.<br />
The work surface should be at least 61 cm (24 inches) deep if it is accessible<br />
from both front and back. If the work surface is against a wall, it should be at<br />
least 76 cm (30 inches, if possible) deep. If possible, allow at least 15 cm (6<br />
inches) behind the system for cable egress, ventilation, and access to the<br />
power switches.<br />
19
Change language