CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operator’s <strong>Manual</strong><br />
Chapter 3: Installing the <strong>Analyzer</strong><br />
3 Connect the tee on the left (inlet) side to the drain tube coming from the GLS.<br />
Drain Tube<br />
Figure 3-57<br />
GLS Drain Tube.<br />
From Drain<br />
To Waste<br />
Figure 3-58<br />
Waste and Drain Connections.<br />
4 Find a Luer male barbed fitting (look for this in the 10 liter waste container).<br />
Replace one of the Luer caps on the waste container lid with the barbed fitting.<br />
Attach the other end of the waste tube to this fitting.<br />
To prevent pressure buildup in the 10-liter waste container, be sure that at<br />
least one of the two vents on the 10-liter waste container are open (uncapped)<br />
during operation.<br />
60