CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operator’s <strong>Manual</strong><br />
Chapter 3: Installing the <strong>Analyzer</strong><br />
8 Connect the reagent uptake tube to the inlet side of channel number four.<br />
When in use, to ensure that no precipitated solids are pumped through the<br />
system, the reagent tube should not touch the bottom of the reagent bottle.<br />
Reagent Uptake Tube<br />
(From Reagent Bottle)<br />
From Sample Probe<br />
Figure 3-61<br />
Reagent Connection.<br />
9 Locate the smallest (1/16" dia.) polypropylene tee provided in the completion<br />
kit. Install this tee on the output side of the pump. It connects the top two<br />
channels (channels 3 and 4).<br />
Liquid Mix<br />
Tube<br />
Figure 3-62<br />
Small Tee Fitting on Ch 3/4 Outputs.<br />
62
Change language