CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CETAC</strong> QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
Chapter 3: Installing the <strong>Analyzer</strong><br />
9 Hold the cable flat against the rotor and secure the cable by tightening<br />
thumbscrew on the rotor. Maintain the 2 mm (~ 3/32 inch) gap while the rotor<br />
pin is making contact with the stator stop (full clockwise rotation of rotor).<br />
The thumbscrew should be as tight as possible using just your fingers.<br />
Figure 3-19<br />
Securing Cable to Rotor.<br />
10 Rotate the rotor back and forth to ensure that it moves freely. Ensure that the<br />
full width of the cable is under the clamp.<br />
Clamp<br />
Figure 3-20<br />
Verifying Cable Movement and Cable Clamp.<br />
35
Change language