CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>CETAC</strong> QuickTrace M-<strong>7600</strong> <strong>Mercury</strong> <strong>Analyzer</strong><br />
Chapter 3: Installing the <strong>Analyzer</strong><br />
Step 9: Install the Gas-Liquid Separator (GLS)<br />
WARNING<br />
HANDLE WITH CARE<br />
Use care when handling the GLS. If the GLS breaks, there is a risk of cut<br />
from broken glass.<br />
Use only your fingers to tighten the fittings.<br />
1 Locate the gas-liquid separator (GLS).<br />
Liquid Mix (In)<br />
Gas Supply (In)<br />
Hg Vapor (Out, not<br />
connected until just<br />
before use)<br />
Drain (Out)<br />
Figure 3-44<br />
Gas-Liquid Separator (GLS).<br />
2 Locate the gas-liquid separator (GLS) and gently slide it into the holder with<br />
the drain and Hg vapor ports facing you. Raise it as far as it will go.<br />
Figure 3-45<br />
Placing the GLS.<br />
53
Change language