CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
CETAC M-7600 Mercury Analyzer Operator's Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operator’s <strong>Manual</strong><br />
Chapter 7: Safety and Regulatory Information<br />
Grounding<br />
This equipment is designed for connection to a grounded (-earthed) outlet.<br />
The grounding type plug is an important safety feature. To reduce the risk of<br />
electrical shock or damage to the instrument, do not disable this feature.<br />
See “Power Requirements” on page 20 and “Electrical Characteristics” on page<br />
150 for more information.<br />
Mains Disconnect<br />
The power switch on the rear panel is not the mains disconnect. Power mains<br />
disconnect is accomplished by unplugging the power cord at the power supply<br />
or at the wall outlet. Ensure the power cord is easily accessible and removable,<br />
in the event of an emergency which requires immediate disconnection.<br />
WARNING<br />
SHOCK HAZARD<br />
Ensure that power cord is disconnected before removal of any covers.<br />
Mechanical Hazards<br />
1<br />
Figure 7-1<br />
Overview of Mechanical Hazards.<br />
WARNING<br />
1 –PINCH HAZARD<br />
Keep fingers, hair, and loose clothing away from moving parts when the<br />
system is powered on.<br />
Additional hazards related to the autosampler are described in the<br />
autosampler <strong>Operator's</strong> <strong>Manual</strong>.<br />
152
Change language