272144 Vanguard Twin Cylinder OHV BRIGGS & STRATTON.pdf

Fig. 126
6. Install emulsion tube body (8) with new gasket
(19), Fig. 127. Tighten screw securely.
Fig. 128
8. Assemble bowl gasket (9) to body.
9. Install main jet, according to engine model.
10. Install the float bowl assembly to the carburetor
body.
11. Assemble fuel solenoid (13) to float bowl (12),
Fig. 129. Use a 13 mm thin profile wrench to
tighten the solenoid.
CAUTION: Use care when tightening solenoid to
prevent damage to fixed main jet and housing.
Fig. 127
7. Assemble inlet needle (10) to float (11) and
install float, Fig. 128.
Fig. 129
12. Assemble float bowl to carburetor body.
108