Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
Table 4-42: Data Set Composition and Relationship Requirements for CSP-FR
CSPD-58
CSPD-59
CSPD-60
The CreateServicePackageFailedReturn message
a) shall contain one ServicePackageReference data set;
b) shall contain either one CspDenial data set or one or more CspError data sets.
[syntactic validation]
The servicePackageRef parameter shall contain the same value as the servicePackageId
parameter in the corresponding CSP-I.
[service management validation]
If the CSP-I fails because multiple SpaceLinkEventSequenceReference data sets reference
Event Sequence Profiles that reference the same carrier profile (diagnostic value ‘duplicate
event sequences for the same carrier profile’), the CSP-FR shall contain one
CspError data set for each such SpaceLinkEventSequenceReference data set.
4.4 REPLACE_SERVICE_PACKAGE (RSP) OPERATION
4.4.1 PURPOSE
The REPLACE_SERVICE_PACKAGE (RSP) operation allows UM to request one or more
changes to an existing Service Package at a CM.
4.4.2 PROCEDURE
The procedure for the RSP operation is a three-phase operation procedure, which follows the
three-phase operation procedure pattern specified in 3.4.2.
The RSP operation involves the exchange of the following messages:
– ReplaceServicePackageInvocation (RSP-I);
– ReplaceServicePackageAcknowledgedReturn (RSP-AR);
– ReplaceServicePackageSuccessfulReturn (RSP-SR);
– ReplaceServicePackageFailedReturn (RSP-FR).
The sequence and activity diagrams for the REPLACE_SERVICE_PACKAGE operation are
the three-phase operation procedure pattern sequence and activity diagrams specified in
3.4.2, with the argument lists:
Sequence Diagram
threePhaseOperationProcedurePatternSequence {UM, CM, RSP-I,
RSP-AR, RSP-SR, RSP-FR}
CCSDS 910.11-R-2 Page 4-51 March 2008