Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
Table 3-10: Stereotype Data Set
Parameter Name Parameter Definition/Description Data Type Units
additionalInformation Additional information that is required for some String n/a
values of diagnostic. The content is specific to
the particular operation and the associated instance or
the diagnostic value.
diagnostic:
A description of the error.
Enum n/a
All instances of shall
include the value ‘operation timeout’, to be
returned when the operation cannot be completed
before the disposition timer expires (see requirements
2PP-0103 in table 3-29 and 3PP-0104 in table 3-33).
Instances of may include
the value ‘mutually incompatible
parameter value’, to be returned when the
invocation contains two or more parameter values
that are incompatible with each other. The cause of
this diagnostic is specific to the particular
operation.
All other values are specific to the particular
erroredItem
privateAnnotation
operation.
Identification of the parameter that fails validation
because of an error in the invocation. The content is
specific to the particular operation and the associated
instance of the diagnostic value.
Implementation-dependent information that may
provide additional details on the error.
DistinguishedName
String
or
‘NULL’
n/a
n/a
3.3.4.3.3.3.2.2 Data Set Composition and Relationship Requirements
Table 3-11 defines the data set composition and relationship requirements common to all
messages conforming to the stereotype.
Table 3-11: Data Set Composition and Relationship Requirements for All
FailedReturn Messages
GRD-0020
GRD-0021
GRD-0022
GRD-0023
A failed return message shall contain the Stereotype Message parameters
specified in table 3-9.
[syntactic validation]
The failed return message shall contain one or more Error data sets.
[syntactic validation]
If there is no additional information, the additionalInformation parameter shall have null
content.
The invocationMessageSequenceNumber and serviceAgreementRef parameters
shall match the messageSequenceNumber and serviceAgreementRef, respectively, of
the invocation to which the return responds.
[service management validation]
CCSDS 910.11-R-2 Page 3-25 March 2008