23.05.2015 Views

Space Link Extension - Service Management - CCSDS

Space Link Extension - Service Management - CCSDS

Space Link Extension - Service Management - CCSDS

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT<br />

Table 7-36: RafProdAgreement Data Set<br />

Name Definition/Description Data Type Units<br />

tlmRandomizationOptions Whether the use (or non-use) of pseudorandomization<br />

on this all frames channel will be<br />

constant or will change on a Carrier Profile basis. It<br />

represents a set containing any combination of the<br />

following values, with no repeated components:<br />

– ‘tlmRandomizationUsed’—pseudorandomization<br />

used on this channel;<br />

– ‘tlmRandomizationNotUsed’—pseudorandomization<br />

not used on this channel.<br />

The set shall contain at least one component.<br />

set of Enums n/a<br />

Table 7-37: FecfOnlyAgreement Data Set<br />

Name Definition/Description Data Type Units<br />

transferFrameLength-<br />

Range.<br />

The range of the length of <strong>CCSDS</strong> transfer frames on<br />

this all frames channel for the life of the <strong>Service</strong><br />

Agreement. Composed of two elements<br />

(lowerBound, upperBound).<br />

– The lower bound value of 7 octets is derived<br />

from the minimum Transfer Frame Primary<br />

Header length of 6 octets plus 1 octet of Transfer<br />

Frame Data Field content (references [3] and<br />

[6]);<br />

– The upper bound value of 2048 octets is<br />

specified in reference [5].<br />

NOTE – The length of the transfer frame does not<br />

include any Reed-Solomon check<br />

symbols that may be present.<br />

pair of<br />

Unsigned<br />

Integers<br />

[7..2048]<br />

octets<br />

Table 7-38: ReedSolomonCodingAgreement Data Set<br />

Name Definition/Description Data Type Units<br />

eccOptions<br />

The set of values allowed for error-<br />

CorrectionCapability—The maximum<br />

number of errored symbols per codeword to be<br />

correctable (see reference [5]).<br />

It represents a set containing any combination of the<br />

following values, with no repeated components:<br />

– ‘8’;<br />

– ‘16’.<br />

complete set<br />

or subset of<br />

{8, 16}.<br />

n/a<br />

interleaveOptions<br />

The valid depths of interleave that will be used on<br />

this all frames channel.<br />

complete set<br />

or subset of<br />

{1, 2, 3, 4, 5}.<br />

n/a<br />

<strong>CCSDS</strong> 910.11-R-2 Page 7-22 March 2008

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!