Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
Table 7-42: BilateralServiceAgreement Data Set
Name Definition/Description Data Type Units
bilateralServiceAgreeme Identification of Service Agreement data format other String256 n/a
ntFormatId
than the format defined by the
ServiceAgreement data set. This format has to
be bi-laterally agreed between UM and CM.
bilateralServiceAgreeme
ntData
Contains the Service Agreement data in the format
defined by the parameter
serviceAgreementBilateralFormatId.
Opaque
n/a
allowedThrowEventIdenti
fiers
Table 7-43: TransferServiceAgreement Data Set
Name Definition/Description Data Type Units
The set of numbers that are valid values for the set of Positive n/a
event-identifier parameters of CLTU-THROW- Integer
EVENT operations.
maxDataRateLimitation
minLowerBoundReportingP
eriod
rOnlineFrameBufferOverf
lowDiscardNumber
rOnlineFrameBufferSize
The upper bound on the value of
dataRateLimitation for any return transfer
service instance in the context of the Service
Agreement.
If rate metering is unsupported, or if there is no limit
on the rate, the value is ‘NULL’.
The minimum value that the
lowerBoundReportingPeriod for any transfer
service instance may take.
The number of frames to be discarded if the return
online frame buffer becomes full.
The size of the return online frame buffer for each
complete online transfer service instance in the
context of the Service Agreement.
Positive
Integer
or ‘NULL’
seconds
Unsigned
Integer
Unsigned
Integer
bits/secon
d
n/a
frames
frames
7.3.5.3 Data Set Composition and Relationship Requirements
Table 7-44 defines the data set composition and relationship requirements for the QSA-SR
message.
Table 7-44: Data Set Composition and Relationship Requirements for QSA-SR
QSAD-01 The QueryServiceAgreementSuccessfulReturn message shall contain either:
a) one ServiceAgreement data set; or
b) one BilateralServiceAgreement data set.
[syntactic validation]
QSAD-03 The ServiceAgreement data set shall contain:
a) one ConfigurationConstraintsSpecification data set;
b) one OperationsConstraintsSpecification data set.
[syntactic validation]
CCSDS 910.11-R-2 Page 7-24 March 2008