Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
Table 4-56: Data Set Composition and Relationship Requirements for DSP-FR
DSPD-4
DSPD-5
The DeleteServicePackageFailedReturn message
a) shall contain one ServicePackageReference data set;
b) shall contain either one DspDenial data set or one or more DspError data sets.
[syntactic validation]
For the ServicePackageReference data set the servicePackageRef shall have the
same value as the servicePackageRef in the DSP-I message.
[service management validation]
4.6 SELECT_ALTERNATE_SCENARIO (SAS) OPERATION
4.6.1 PURPOSE
The SELECT_ALTERNATE_SCENARIO (SAS) operation allows UM to request CM to
configure the prime scenario of a specified Service Package to one of the alternate scenario
defined by the Service Package.
4.6.2 PROCEDURE
The procedure for the SAS operation is a two-phase operation procedure, which follows the
two-phase operation procedure pattern specified in 3.1.
The SAS operation involves the exchange of the following messages:
– SelectAlternateScenarioInvocation (SAS-I);
– SelectAlternateScenarioSuccessfulReturn (SAS-SR);
– SelectAlternateScenarioFailedReturn (SAS-FR).
The sequence and activity diagrams for the SELECT_ALTERNATE_SCENARIO operation
are the two-phase operation procedure pattern sequence and activity diagrams specified in
3.1 the argument lists:
Sequence Diagram
twoPhaseOperationProcedurePatternSequence {UM, CM, SAS-I, SAS-SR,
SAS-FR}
Activity Diagram
twoPhaseOperationProcedurePatternActivity {UM, CM, SAS-I,
SAS-SR, SAS-FR,
sasRoutineTimeout,
sasUrgentTimeout}
CCSDS 910.11-R-2 Page 4-66 March 2008