Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
DTPC-05 CM shall validate that the sleSmCreatorName associated with the DTP-I is the same as the
sleSmCreatorName of the Trajectory Prediction associated with the trajectoryId referenced by
the trajectoryRef in the DTP-I.
[service management validation]
DTPC-06 CM shall validate that each DTP-I parameter that is constrained by a Service Agreement parameter is
consistent with the applicable Service Agreement parameter.
[service management validation]
DTPC-07 If the SLE Complex has locally defined DTP-I relationship requirements in addition to those specified
in this standard, CM shall validate that the DTP-I conforms to all such local requirements.
[service management validation]
DTPC-08 If the Trajectory Prediction being deleted is referenced by pending or executing Service Packages, CM
shall reject the DTP-I and send a DTP-FR.
[service management validation]
DTPC-09 If the DTP-I passes syntactic and service management validation, CM shall:
a) delete the referenced Trajectory Prediction;
b) remove the Trajectory Prediction as applying against the maxSizeTrajectoryFilestore
parameter of the Service Agreement; and
c) return a DTP-SR message.
[perform operation]
6.4.4 DeleteTrajectoryPredictionInvocation (DTP-I) MESSAGE (UM CM)
6.4.4.1 General
The DeleteTrajectoryPredictionInvocation (DTP-I) message conforms to the
data set composition and relationship requirements for, and inherits the parameters of, the
stereotype, as specified in 3.3.4.3.2. Figure 6-5 shows the message
structure of the DTP-I as a class diagram.
Figure 6-5: DTP-I Message Structure, presented in a Class Diagram
6.4.4.2 Parameters
The TrajectoryPredictionReference data set is defined in table 6-11.
6.4.4.3 Data Set Composition and Relationship Requirements
Table 6-18 defines the data set composition and relationship requirements for the DTP-I
message.
CCSDS 910.11-R-2 Page 6-15 March 2008