Space Link Extension - Service Management - CCSDS

DRAFT RECOMMENDED STANDARD FOR SPACE LINK EXTENSION SERVICE MANAGEMENT
6.5.6.2 Parameters
The TrajectoryPredictionReference data set is defined in table 6-11.
Table 6-27 defines the additional values of the diagnostic parameter for the QtpError
data set, identifies the CM and data set composition service management requirements that
result in that diagnostic value being returned, and identifies the contents of the
erroredItem and additionalInformation parameters that accompany each
diagnostic value.
Table 6-27: QtpError Data Set diagnostic Parameter Definition
diagnostic
value Definition/Description Rqmt
‘operation When the operation cannot be 2PP-0103
timeout’ completed before the in
‘trajectoryRef
non-existent’
‘other’
disposition timer expires.
There is no Trajectory
Prediction with this identifier
already registered at CM for
the referenced Service
Agreement.
An error condition that is
private to the CM has
occurred.
Content of
erroredItem
not applicable
Content of
additional-
Information
not required
table 3-29
QTPD-01 trajectoryRef not required
QTPC-05
identification of the
parameter in violation
CM-internal reason for
invalidation
6.5.6.3 Data Set Composition and Relationship Requirements
Table 6-28 defines the data set composition and relationship requirements for the QTP-FR
message that are in addition to those of the
stereotype.
Table 6-28: Data Set Composition and Relationship Requirements for QTP-FR
QTPD-06 The QTP-FR shall contain one TrajectoryPredictionReference data set.
[syntactic validation]
QTPD-07 The value of the trajectoryRef parameter shall be the same as the value of the trajectoryRef
of the QTP-I to which this return responds.
[service management validation]
CCSDS 910.11-R-2 Page 6-24 March 2008